Pulsed erbium-doped fiber amplifier is a series of fiber amplifier products dedicated to picosecond and nanosecond laser pulses. It has the advantages of high gain and low noise while outputting peak power laser pulses and minimizing fiber nonlinear effects. Support the upper computer software control, compact and convenient for integration, and can provide desktop or modular packaging.
Features:
Application：
² Short pulse amplification
² Optical fiber sensing
² High peak power
² Lidar
² Those can be customized
² Fiber laser
Optical index
Unit
Typical value
Notes
Wavelength range
nm
1530~1565
* Optional band-pass filter
pulse width
ns
0.1~50
Pulse frequency
kHz
1~1000
Peak value of input optical pulse
mW
1~10
Peak value of output light pulse
W
Noise index
dB
5.5
Gain flatness
3
Polarization dependent gain
0.5
Polarization mode dispersion
ps
Input/output isolation
>35
Pigtail joint type
-
FC/APC
Pigtail type
SMF-28eSingle mode fiber
Operating mode
Automatic current controlACC)
Electrical and environmental parameters
table model
module
control mode
Button
RS232 Serial communication
communication interface
* Optional
DB9 Female
Power supply
100~240V AC, <30W
5V DC, <15W
Size
260(W)×280(D)×120(H)mm
125(W)×150(D)×20(H)mm
Operating temperature range
-5~+55°C
Operating humidity range
0~70%
Order information/Model
EDFA
Operating wavelength
Amp Type
output power (dBm)
Fiber type
Package Type
C=C band
PL=Pulse amplifier
100/200/500/1000
SM=Single mode fiber
M=module
B=table model
